The 3rd part of Smart Living Room project
When we want a smart living room, we want it to be comfortable for people, even we forget to turn on the air condition or radiator.
Before the module sends the IR signals to the A/C, it is necessary to get the current indoor temperature and humidity. Referring to the data from the weather forecast is embarrassing.
In this part, we use the AHT10 sensor to get the temperature and humidity. And the ESP8266 reads the data in a certain interval and sends the display command to the clarkwise touch screen.
When an interval is entered on the clarkwise touch screen and sent back to ESP8266, the MCU responds to the UART RX interrupt set up the refresh interval.
Guys, don’t get us wrong. We are not selling the Smart Living Room kit, we are selling the touch screen. If you want to support us, get on.
Subscribe to Our Newsletter
- AHT10 Temperature & Humidity Sensor
- clarkwise touch screen
Other parts of SmartLivingRoom project:
Get Source Code The 1st part of the Smart Living Room project It is already 2021. If we want to build a living room, the
Get Source Code The 3rd part of Smart Living Room project When we want a smart living room, we want it to be comfortable for
The second part of the smart living room project.
Using ESP8266 + Smart IR + clarkwise touch screen to record and store the IR signals from the remote controller and send the signal to the receiver (Yamaha Hi-Fi Amplifier)